1602 Parking Control Barrier Gate Operator

The Model 1602 is for use in applications such as industrial sites and loading dock areas, designed to control wide traffic lanes. The heavy-duty Harmonic Arm Linkage assures smooth and accurate Arm travel of 90° in approximately 5.5 seconds.

These Operators are designed so they can be mounted on either the left or right hand side of the roadway. Battery- powered Convenience Open option available, which provides a method to open the gate if AC power is lost.

Overview
Features
Tech Specs
Resources
Accessories
  • 1602 - Traffic Control - Barrier Gate Operators
  • 1602 - Traffic Control - Barrier Gate Operators

1602 Parking Control Barrier Gate Operator

Traffic Control Barrier Options That Fit Any Application

The 1602 operator is designed for traffic lanes up to 27-feet wide in low use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right-hand side of the roadway. LED/Reverse edge light kits are available for the Octagonal arms only. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

 

 

Optional Battery-Powered
Convenience Open
Suitable for Low-Cycle
Commercial & Industrial Use
Barrier Designed for
Wide Traffic Lanes

 

Find A Dealer

Applications

Apartment Complexes & College Residence Halls
Gated Communities
Mixed Use Buildings
Commercial & Industrial
Self Storage
Parking Facilities

Product Features

1602 Perimeter Access Management System feature - Traffic Control barrier - Barrier Gate Operators

Perimeter Access Management System

Automatic sequencing inputs for use with Slide and Swing Gate Operators.

1602 traffic control Massive Lanes

Massive Lanes

Designed to control wide traffic lanes in limited use applications such as industrial sites and loading dock areas —27 feet maximum

WARN Beeper / Operate Beeper

Beeper will beep 2 times before lowering arm ONLY when the TIMER times out. If using a down loop, when it gets activated, it will cancel the timer and lower arm WITHOUT beeping.
Beeper will beep 2 times before lowering arm EVERYTIME.

    %%tb-image-alt-text%%
    Octagonal Lighted Signal Arm

    Light the way for customers to exit easily and safely with signals and sensors.

    %%tb-image-alt-text%%
    Wishbone Style Joint and Cable Tensioners

    Allows Arms up to 27 ft (8.2 m) in length.

    %%tb-image-alt-text%%
    DKS Pedestrian Protection System

    It’s aware — even when they’re not.

    %%tb-image-alt-text%%
    Left or Right Hand Mount

    Operators are designed so they can be mounted on either the left or right hand side of the roadway.

    Technical Specifications

    20′ / 24′ / 27′ Maximum Arm Lengths

    Left or Right Hand Mount

    Arm Styles: Aluminum Round / Octagonal Wishbone, Aluminum Octagonal Single & Wood Rectangular*

    Arm Rotates 90° in Approx. 5.5 Seconds

    1 HP Continuous Duty Motor

    Specifications
    • 1 HP continuous-duty motor.
    • 60:1 gear-box running in a continuous oil bath.
    • 115, 230*, 460* VAC.  (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
    • Arm rotates 90° in approximately 5.5 seconds.
    • Class III and IV applications.
    • Compliant with UL 325 and 991.  ETL Listed.  (Note: To be compliant with UL 325 and industry safety guidelines, entrapment protection devices need to be installed with this gate operator.  Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
    • Dimensions (operator only): 15.25″W x 39.75″H x 15.75″D.
    Options
    • Aluminum Round Wishbone Arms: 20 Feet, 24 Feet, 27 Feet
    • Aluminum Octagonal Wishbone Arms: 20 Feet, 24 Feet, 27 Feet
    • Aluminum Octagonal Single Arms: 17 Feet
    • LED/Reverse edge light kits (Octagonal arms only)
    • 20-Foot Wood Arm (requires 1602-041 kit)
    • DKS Pedestrian Protection System
    • Plug-in loop detectors.
    • DC powered convenience open.
    • Heater kit.
    • Fan kit.
    • Surge suppressors.
    • Manual Crank kit (factory installed option only).

     

    Mechanical
    • Magnetic limit control.
    • Ports for plug-in loop detectors.
    • Automatic sequencing inputs for use with slide and swing gate operators.
    • Up input memory buffer.
    • Down memory option.
    • Multiple up commands.
    • Two convenience outlets.
    • Gate tracker reporting output.
    • Programming switches.
    • Built-in power On/Off switch.
    • Left or right hand mount.

     

     

    Dimensions and Weight

     

     

    Part Number 2-Piece Single Arm Maximum Length
    1601-805 Octagonal Aluminum 17 Feet
    Part Number 3-Piece Wishbone Arm Types Maximum Length
    1602-162 Round Aluminum 20 Feet
    1602-164 Round Aluminum 24 Feet
    1602-166 Round Aluminum 27 Feet
    1602-282 Octagonal Aluminum 20 Feet
    1602-284 Octagonal Aluminum 24 Feet
    1602-287 Octagonal Aluminum 27 Feet
    1602-340 Wood 20 Feet
    Aluminum arms include necessary hardware kits.
    1602-340 arm requires 1602-041 mounting kit.

     

     

    Tech Support

    Find all the documentation needed to install, program, and operate your DKS product below.

    Easy Connect Manuals icon traffic
    Easy Connect
    Quick Start Guides icon traffic
    Quick Start Guides
    Owners Manuals icon traffic
    Owner’s Manuals
    Accessory Manuals icon traffic
    Accessory Manuals
    Tech Tip Videos icon traffic
    Tech Tip Videos

    Resources

    1602 | Literature
    View Online
    Download
    Smart Gate Controller | Literature
    View Online
    Download
    Smart Gate Controller | Literature
    Download
    Traffic Control | Brochure
    Download

    DKS Videos

    DKS Traffic Control: Octagonal Lighted Signal Arm
    Traffic Control – Barrier Gates
    View All DKS Videos
    Scroll to Top
    Skip to content