1602 Parking Control
BARRIER GATE OPERATOR
TRAFFIC CONTROL BARRIER OPTIONS THAT FIT ANY APPLICATION
- Designed to control wide traffic lanes (27 feet maximum) in limited use applications
- Suitable for low-cycle applications to restricted access areas such as prisons, airport security areas or industrial sites
- Electronic limit settings
- Three-piece aluminum arms available in 20, 24 and 27 foot lengths
- DKS Pedestrian Protection System
- 5-year limited warranty
WARN Beeper / Operate Beeper
The beeper will beep two times before lowering the arm when the timer times out. When the down-loop is activated, it will cancel the timer and lower the arm without beeping
Octagonal Lighted Signal Arm Option
light the way for customers to exit easily and safely with signals and sensors
DKS Pedestrian Protection System
it’s aware – even when they’re not
Automatic P.A.M.S.
sequencing with slide and swing gates
ACCESS CONTROL SOLUTIONS
| MODEL | 1602 |
|---|---|
| CLASS OF OPERATION | II, III, IV |
| ARM TYPE/MAX LENGTH | 20 Ft (6.1 m) / Aluminum 24 Ft (7.3 m) / Aluminum 27 Ft (8.2 m) / Aluminum 20 Ft (6.1 m) / Wood |
| MOTOR | 1 HP Continuous Duty AC Motor |
| INPUT | 115 VAC, 60 Hz, 9.7A 230 VAC, 60 Hz, 4.9A1 460 VAC, 60 Hz, 2.5A1 |
| OPTIONS | Convenience Open Package2 Heater and Fan Kits Lighted Arm3 |
1. These operators use a step-down transformer to achieve 115 VAC operating voltage.
2. Optional factory installed DC powered drive system provides an automatic method to
open the gate when primary (AC) power fails.
3. Lighted Arm available with aluminum arm type only.
TECHNICAL FEATURES
MECHANICAL
Primary Reduction is provided by a 60:1 worm gear reduction system running in a continuous oil bath
Arm rotates 90° in approximately 5.5 seconds
G90 galvanized steel housing, painted white rated NEMA 4x
Fail-secure mechanical release method
Left- or right-hand mount
Arm Kits: Three-piece 3” round aluminum arm available in 20, 24 and 27 foot length
Arm kits include arm mounting hubs, hardware, and counterbalance weights
DKS Pedestrian Protection System:
The system reverses barrier arm if person is detected, and lowers barrier arm if unauthorized vehicle enters. Additional protection to help prevent inadvertent accidents (optional)
GATE TRACKER™
Reporting output provides operator data to a
DKS 1833, 1835, 1837 or 1838 access control system
(requires 2358 expansion board)
Electrical
Magnetic electronic limit controls
Auto-close timer 3.5 to 59 seconds
P.A.M.S. (Perimeter Access Management System) sequence with a slide or swing gate operator
Up input memory buffer
Down memory option
Multiple up commands
Port for plug-in open (up) detector
Port for plug-in reverse (down) detector
Ports for plug-in loop detectors
Programming switches
Built-in power On/Off switch
Built-in Selectable Warning Beeper
Miscellaneous
Environmental: 10°F to 140°F (-12°C to 62°C)
Thermostatically controlled heater kit recommended for colder environments
Shipping weight approximately 160-180 Lbs (72-81 kg)
Arm kit: 45 Lbs (20 kg)
DOORKING, INC.
Access Control Solutions since 1948
120 Glasgow Avenue, Inglewood, California 90301 U.S.A.
Tel: 310-645-0023 FAX: 310-641-1586
www.doorking.com
© 2026 All Rights Reserved. Product specifications may change without notice. Rev. 2/26
MEMBER:
