Breakaway Parking Arms

YOU DON’T HAVE TO STOP JUST BECAUSE THEY DON’T

The perfect solution to reduce maintenance costs, DoorKing’s Breakaway Hardware Kit for Model 1601 Parking Gate Operators prevents costly arm replacements by allowing the arm to swing out of the way in the event that a vehicle fails to stop. The system is easily reset by simply snapping the arm back into place.

The Breakaway Kit is designed for aluminum arms only and can be set to breakaway from either side of the cabinet.

Find A Dealer

Once broken away,

the Parking Arm snaps easily back into place.

Set Breakaway

From either side of the cabinet.

DKS Barrier Gate Breakaway Arms

Main Tabs

Overview

DoorKing’s breakaway hardware kit for Model 1601 Parking Gate operators prevents costly arm replacements by allowing the arm to swing out of the way in the event a vehicle fails to stop at a lowered arm. If the arm is struck and breaks away, the gate operator automatically shuts down. The system is easily reset by simply snapping the arm back into place. The breakaway kit is designed for aluminum arms only and can be setup to breakaway from either side of the cabinet.

Specs

Features:

This kit is designed for use with 1601-080 and 1601-081 parking gate operators only. It cannot be used with 1602, or 1603 operators.
The kit provides a break-away bracket assembly for an aluminum arm only.
If the arm is struck and breaks away (pivots in one direction only, see below), gate operator will automatically shut down.
The arm simply snaps back into the release rollers to function normally again.
Breakaway Hardware Kit 1601-295 is required.

DKS Breakaway Barrier Arm pivot direction

Technical Downloads

Vertical Tabs

Accessories Manuals

YOU DON’T HAVE TO STOP JUST BECAUSE THEY DON’T

Main Tabs

Vertical Tabs

1601-269-M-8-23_Oct_Arm_Breakaway_UL.pdf

1601-286-V-12-21_Round_Arm_Breakaway.pdf

Traffic Control

Traffic Control Accessories