1610 Traffic Spikes

Traffic Control Spike Systems

Surface and flush mount below ground options available. Surface spikes install easily without trenching and doubles as a speed bump. Spring loaded surface mount available in 3 foot sections, and flush mount below ground assembly available with weighted or spring loaded spikes. CAUTION: not to be used in areas subject to freezing weather with the potential for snow and ice accumulation.

Find A Dealer

Spring Loaded

Surface mount available in 3 foot sections.

Lock Down

In-ground flush mount version available.

flush mount

In-ground assembly available with weighted or spring loaded spikes.

Surface Mount

Spikes install easily without trenching and doubles as a speed bump.

Self Storage, Gated Communities, Parking, Condominium/Resident Hall, Mixed Use, Commercial & Maximum Security

Main Tabs

Overview

Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entry location. Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lanes. Flush mount spikes are available with Spring Retraction or with Weighted Retraction. Speed bumps force drivers to slow down while driving through the controlled entry point. They are also ideal for keeping vehicular traffic at a safe speed while driving over traffic spikes. Speed bumps must be installed with traffic spike systems to slow vehicular traffic over the spikes. Traffic crossing these spikes in excess of 5 MPH may cause tire damage and create excessive wear in the spike system.

CAUTION: Installation and use of traffic control spike units in areas that are subject to freezing weather with potential of snow and ice accumulation IS NOT RECOMMENDED. The units can freeze in the up position and cause unintended damage or injury due to the inability for the spikes to retract.

Specs

Features:

Flush Mount Traffic Spikes

Individual spring loaded spikes.
Stainless steel springs.
Weight spikes (no springs) version available.
Lock-down version available.
Flush in-ground unit.
Painted bright red for easy visibility.
Ideal to enforce one-way traffic.
Dimensions: 6.5"H x 8.5"W (at top) x 72"L. Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
Speed bumps must always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage and create excessive wear on the spike system.
Do not use in areas subject to freezing temperatures with potential of snow and ice accumulation.
Standard spike units 8,000 Lb. per axle weight limit.
Heavy-Duty (HD) spike units maximum 20,000 Lb. per axle weight limit.

Speed Bumps

Speed bumps are constructed from solid composite material.
Speed bumps can be easily removed and re-installed.
Painted bright yellow for easy visibility.
Designed for installation on concrete surfaces only.
Dimensions: 2"H x 12"W x 72"L.

Specifications:

Surface Mount Traffic Spikes

Spikes sections available in 3-foot sections.
End caps provide a smooth end to the spike section.
Torsion springs.
Lock-down standard.
Surface mount unit.
1/4-inch diamond plate painted bright yellow for easy visibility.
2-inch rise provides a built-in speed bump.
Dimensions: 2"H x 20"W x 36"L. Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
Speed bumps must always be used with traffic spikes. Speeds in excess of 5-MPH over the spikes can cause tire damage and excessive wear on the spike system.
Do not use in areas subject to freezing temperatures with potential of snow and ice accumulation.
20,000 Lb. per axle maximum weight limit.