CONTROL STATIONS PROVIDE MANUAL CONTROL FOR A SINGLE GATE CONTROL REQUIREMENTS

CONTROL STATIONS – INTERIOR

• Controls mount into a single-gang electrical box (except 1211-081 and 1200-016)
• 1211-081 exit button is mullion mounted
• 1200-016 is surface mounted
• Stainless steel faceplates
• Key switch uses mortise cylinder that can be re-keyed

CONTROL STATIONS – DOOR/GATE

• Open – Close – Stop indoor and outdoor control Stations
• Manual gate controller provides normal, momentary open or hold open operation

TECHNICAL FEATURES

INTERIOR CONTROL STATIONS

Models

1211-080 Exit Button

• Provides a release device for doors secured with a magnetic lock or electric strike
• Lighted Exit push buttons
• Requires 12-VDC power to illuminate exit button.
• Stainless steel faceplate

1211-081 Exit Button

• Stainless steel faceplate
• Requires 12-VDC power to illuminate exit button
• Indoor use only

1206-080 Mortise Cylinder Keyswitch

• Momentary contact
• Mortise cylinder can be re-keyed to match existing locks
• N.O. or N.C. operation
• Indoor use only

Features All interior control are designed to mount into a single-gang electrical box except the model 1211-081 exit button, which is designed for mullion mounting. All interior controls are designed to control a single door/gate only

Operating Temperature: -10°F to 145°F (-23°C to 62°C)

DOOR/GATE OPERATOR CONTROL STATIONS

Models

1200-006 3-Button

• Ideal for exterior applications, interior too
• Can be surface or post mounted
• OPEN – CLOSE – STOP control
• Operates with DKS models 6050, 6100 and 6300 only

1200-007 / 1200-221 3-Button Interior

• Provides manual control of automated vehicular gates, interior use only
• OPEN – CLOSE – STOP control
• 1200-007: Operates with DKS models 6050, 6100 and 6300 only
• 1200-221: Operates with all other DKS gate operator models

1200-016 3-Button¹

• Can be surface mounted
• NC Stop circuit
• OPEN – CLOSE – STOP control
• Can be used with most door and gate operators

1200-017 Gate Control Toggle

• 3-position control switch for automated vehicular gates, interior use only
• Center position is neutral for normal operation
• Down position is momentary contact to open a gate
• Up position is toggled to hold a gate open
• Can be used with most gate operators

¹ Do not use with DKS 6060, 6100 or 6300 model operators.

Features All controls are designed to control a single gate operator only. (1211-081 is mullion mount)

Operating Temperature: -10°F to 145°F (-23°C to 62°C)

© 2026 All Rights Reserved. Product specifications may change without notice. Rev. 7/26