Heater Kits

TELEPHONE ENTRY - see below for Gate Operators

2600-584 Telephone Entry Heater Kit

• Heater and thermostat come equipped with mounting magnets, no mounting hardware is required.
• Thermostat turns heater on at approximately
  40°F (4°C) and off at 55°F (12°C).

• Allows the 1802-EPD Telephone Entry System LCD display to maintain normal operation to approximately -20°F (-29°C). 
• Includes a built-in thermostat that automatically turns the heater on when the temperature drops below 40°F (4°C).
• Also for use with 1812 flush mount units.

• Designed for the 1812 model telephone intercom systems. 
• For climates where temperatures routinely drop below 40°F (4°C). 
• An automatic thermostat will control temperature inside the housing. 

DKS heater and fan kits allow Gate Operator systems to remain operating in cold environments.  Use if temperature routinely falls below 10°F (‐12°C).

• Use this heater kit with the following models:
  6050, 6100, 6300, 9000, 9024*, 9050, 9100, 9150, 9310.

• Use this heater kit with the following model: 9210.

• Use this heater kit with the following models:
  6300, 6500, 6524*, 6550, 9000, 9024*, 9150, 9210, 9220, 9230, 9235, 9240.

• Use this heater kit with the following models:
  9000, 9150, 6300, 6500, 6550.

• Use this heater kit with the following models:
  1601, 1602, 1603.

• Use this heater kit with the following models:
  1601, 1602, 1603.

• Use this heater kit with the following models:
  6500, 6524*, 6550.

* Heaters are active only when AC source power is present.