GATE OPERATOR CONTROL STATIONS

By /

GATE OPERATOR CONTROL STATIONS

Access Control

CONTROL STATIONS PROVIDE MANUAL CONTROL FOR A SINGLE GATE CONTROL REQUIREMENTS

CONTROL STATIONS – INTERIOR

  • Controls mount into a single-gang electrical box (except 1211-081 and 1200-016)
  • 1211-081 exit button is mullion mounted
  • 1200-016 is surface mounted
  • Stainless steel faceplates
  • Key switch uses mortise cylinder that can be re-keyed

CONTROL STATIONS – DOOR/GATE

  • Open – Close – Stop indoor and outdoor control Stations
  • Manual gate controller provides normal, momentary open or hold open operation
%%tb-image-alt-text%%
Interior Surface Mount

1200-016 3-button gate controller is a surface mount control station for indoor use

%%tb-image-alt-text%%
Slim Design

allows the 1211-081 exit button to be mounted into the door jam

%%tb-image-alt-text%%
Construction

ready for easy wall installation

%%tb-image-alt-text%%
Manual Control

for easy access at guarded entries

ACCESS CONTROL SOLUTIONS

TECHNICAL FEATURES

INTERIOR CONTROL STATIONS

Models

1211-080 Exit Button

  • Provides a release device for doors secured with a magnetic lock or electric strike
  • Lighted Exit push buttons
  • Requires 12-VDC power to illuminate exit button.
  • Stainless steel faceplate

1211-081 Exit Button

  • Stainless steel faceplate
  • Requires 12-VDC power to illuminate exit button
  • Indoor use only

1206-080 Mortise Cylinder Keyswitch

  • Momentary contact
  • Mortise cylinder can be re-keyed to match existing locks
  • N.O. or N.C. operation
  • Indoor use only

Features All interior control are designed to mount into a single-gang electrical box except the model 1211-081 exit button, which is designed for mullion mounting. All interior controls are designed to control a single door/gate only

Operating Temperature: -10°F to 145°F (-23°C to 62°C)

DOOR/GATE OPERATOR CONTROL STATIONS

Models

1200-006 3-Button

  • Ideal for exterior applications, interior too
  • Can be surface or post mounted
  • OPEN – CLOSE – STOP control
  • Operates with DKS models 6050, 6100 and 6300 only

1200-007 / 1200-221 3-Button Interior

  • Provides manual control of automated vehicular gates, interior use only
  • OPEN – CLOSE – STOP control
  • 1200-007: Operates with DKS models 6050, 6100 and 6300 only
  • 1200-221: Operates with all other DKS gate operator models

1200-016 3-Button1

  • Can be surface mounted
  • NC Stop circuit
  • OPEN – CLOSE – STOP control
  • Can be used with most door and gate operators

1200-017 Gate Control Toggle

  • 3-position control switch for automated vehicular gates, interior use only
  • Center position is neutral for normal operation
  • Down position is momentary contact to open a gate
  • Up position is toggled to hold a gate open
  • Can be used with most gate operators

1 Do not use with DKS 6060, 6100 or 6300 model operators.

Features All controls are designed to control a single gate operator only. (1211-081 is mullion mount)

Operating Temperature: -10°F to 145°F (-23°C to 62°C)

DOORKING,  INC.

Access Control Solutions since 1948

120 Glasgow Avenue, Inglewood, California 90301 U.S.A. 
Tel: 310-645-0023   FAX: 310-641-1586
www.doorking.com

© 2026 All Rights Reserved. Product specifications may change without notice. Rev. 7/26

MEMBER:

National Apartment Association
Door and Access Systems Manufactures Association International
Scroll to Top
Skip to content