Octagonal Lighted Signal Arm

Light the way for customers to exit easily and safely with signals and sensors.

Octagonal Lighted Signal Arm

Octagonal Arm Choices

Model 1601: Choose Between 1 Piece or 2 Piece Arms

The Model 1601 is for high usage single-lane vehicular traffic control. Typical applications include commercial, industrial, gated communities and apartment complexes. A quick 2.5 seconds rotation opening time, along with rugged construction and multiple optional features make this 1601 a versatile answer to many parking control problems. The 1601 is available in white or gunmetal gray finish.

1 Piece – 14 Ft Arm
P/N 1601-555

2 Pieces – 7 Ft ea = 14 Feet Arm
P/N 1601-567
Best Option for shipping

Model 1602: Available in a variety of lengths up to 27′, and can be freight-shipped in pieces.

The Model 1602 is for limited-use applications such as industrial sites and loading dock areas, designed to control wide traffic lanes. The heavy-duty Harmonic Arm Linkage assures smooth and accurate Arm travel of 90° in approximately 5.5 seconds.

These Operators are designed so they can be mounted on either the left or right hand side of the roadway. Battery- powered Convenience Open option available, which provides a method to open the gate if AC power is lost.

Lengths up to 27′, and can be freight-shipped in pieces

DoorKing DKS 1601 and 1602 barrier gate operators with illuminated lighted arms, shown in 14-foot and 27-foot lengths for traffic control and parking lot security

Options
Reverse Edge

Reverse Edge P/N 8080-080 Reverse Edge 12 Ft. (3.6m) Requires P/N 1601-235 Hardware Kit	Reverse Edge and Red/Green LEDs P/N 8080-096 Reverse Edge with Red/Green LEDs 12 Ft. (3.6m) Requires P/N 1601-235 Hardware Kit

Find A Dealer

Features

Octagonal Lighted Signal Arm feature - Traffic Control - Doorking

Night Visibility at Long Distances

The red lights are visible for long distances and in weather with low visibility conditions.

Edge Sensor

The Arm can be equipped with a built-in edge sensor that reverses the arm on contact with an obstruction. This helps to prevent damage in the event of a barrier breach.

Technical Specifications

1601-555 Octagonal Aluminum 14 Ft

1601 Special Octagonal Aluminum Arms

1601-567 Arm 14 Ft (4.27 m), 2-Piece1
1601-812 Folding Arm Kit 12 Ft (3.66 m)2
1. Ships in 8-ft (2.4m) long box.
2. Minimum ceiling height for this kit is 10 feet (3.04 m)

1601 Octagonal Hardware Kits

1601-242 Hardware Kit3
1601-235 Reverse Edge Hardware Kit4
1601-295 Breakaway Arm Hardware Kit5
1601-297 High Wind Bridge Support Kit6
3. Use this kit for arm only – no reverse edge.
4. Use this kit for arms with reverse edge (includes wiring harness).
5. Use this kit to add breakaway arm feature (includes wiring harness).
6. Use with 1601-295 in areas with higher-than-normal wind loads.

Octagonal Arm Edges8

8080-605 Reverse Edge 5 Ft
8080-606 Reverse Edge 6 Ft
8080-609 Reverse Edge 9 Ft
8080-612 Reverse Edge 12 Ft
8080-905 Reverse Edge 5 Ft Lighted
8080-906 Reverse Edge 6 Ft Lighted
8080-909 Reverse Edge 9 Ft Lighted
8080-912 Reverse Edge 12 Ft Lighted
1601-922 Folding Arm Reverse Edge Lighted9
8080-089 Bumper Edge 13 Ft (not a reverse edge)
8. Edge must be at least 2-Ft shorter than the overall arm length. Edges cannot be used with the 2 Ft (1601-802) arm extension.
9. Includes two (2) 5 Ft lighted reverse edges and wire harnesses.

1602 Aluminum Arms Octagonal

1602-282 3-Piece, 20 Ft (6.09 m)
1602-284 3-Piece, 24 Ft (7.31 m)
1602-287 3-Piece, 27 Ft (8.23 m)

1602 LED/Reverse Edge Kits1 (Octagonal Arms Only)

1602-982 for 20 Ft (6.09 m) arm
1602-984 for 24 Ft (7.31 m) arm
1602-987 for 27 Ft (8.23 m) arm
1. Kits include required LED/Reverse edge strips, power transformer, wire harness and hardware.

1603 Auto-Spikes / Operator Arm Selection

1601-555 Octagonal Aluminum 14 Ft

Arm Options

1601-567 Arm 14 Ft (4.27 m), 2-Piece1
1601-812 Folding Arm Kit 12 Ft (3.66 m)2
1. Ships in 8-ft (2.4m) long box.
2. Minimum ceiling height for this kit is 10 feet (3.04 m)

Octagonal Hardware Kits

1601-242 Hardware Kit5
1601-235 Reverse Edge Hardware Kit6
5. Use this kit for arm only – no reverse edge.
6. Use this kit for arms with reverse edge (includes wiring harness).

Octagonal Arm Edges7

8080-605 Reverse Edge 5 Ft
8080-606 Reverse Edge 6 Ft
8080-609 Reverse Edge 9 Ft
8080-612 Reverse Edge 12 Ft
8080-905 Reverse Edge 5 Ft Lighted
8080-906 Reverse Edge 6 Ft Lighted
8080-909 Reverse Edge 9 Ft Lighted
8080-912 Reverse Edge 12 Ft Lighted
1601-922 Folding Arm Reverse Edge Lighted8
8080-089 Bumper Edge 13 Ft (not a reverse edge)
7. Edge must be at least 2-Ft shorter than the overall arm length. Edges cannot be used with the 2 Ft (1601-802) arm extension.
8. Includes two (2) 5 Ft lighted reverse edges and wire harnesses.