1620 Lane Barrier

1620 LANE BARRIER

Surface Mount Lane Barrier*

The Lane Barrier is ideal in applications where a higher degree of vehicle traffic control is desired, but without the expense of bollards, wedges or crash beams – making it ideal for apartment communities, gated condominiums, car rental agencies, parking lots and toll booths. The lane barrier must be used with the 1603-580 operator (sold separately).

CAUTION: not to be used in areas subject to freezing weather with the potential for snow and ice accumulation.

*This Lane Barrier System is not crash rated. It is intended to provide a formidable barrier to help prevent passenger vehicles and light-duty trucks from driving through a controlled traffic lane.

Find A Dealer

Add-on Accessory

Use with DKS 1603-580 operator.

Steel Barrier

Rotates into surface mount speed bump for easy vechicle entrance.

Heavy Duty Steel Post

Helps prevent vehicle barrier runners.

Steel Barrier Arm

Rotates into surface mount speed bump for easy vehicle entrance.

Self-Storage, Gated Communities, Parking, Condominium/Resident Hall, Apartment Complexes, Mixed Use, Commercial & Industrial

Main Tabs

Overview

Cost savings if you don’t need a crash system*

The DKS Lane Barrier Accessory System is designed to be used with the 1603-580 operator. The Lane Barrier is ideal in applications where a higher degree of vehicle traffic control is desired, but without the expense of bollards, wedges or crash beams – making it ideal for apartment communities, gated condominiums, car rental agencies, parking lots and toll booths.

* This Lane Barrier System is not crash rated. It is intended to provide a formidable barrier to help prevent passenger vehicles and light-duty trucks from driving through a controlled traffic lane.

Specs

Features:

1620 Lane Barrier

Steel barrier arm and heavy-duty post
Surface mount (concrete only) - installs for thousands of dollars less than crash rated systems
Fast speed - raises and lowers in approximately 2.5 seconds
Simple mechanical linkage to DKS 1603-580 Operator keeps Barrier Arm and Lane Barrier in sync - no separate motors or hydraulic valves to worry about
Available for lane widths of 9 Ft (2.74m), 10 Ft (3.0m), 12 Ft (3.66m) and 14 Ft (4.27 m)
Best use is with passenger vehicles and light-duty trucks only

Specifications:

1620 Lane Barrier is not a stand-alone system. It must be used with the 1603-580 Operator (sold separetly)

Speed bump U-channel is 1/4 In (6.35mm) A36 steel
Speed bump top plates are 1/4 In (6.35mm) 4-way multigrip steel plate
Speed bump assembly is zinc plated and finished in powder-coat 90% gloss
Anchor post assembly are surface mounted 8 In (203.2mm) x 8 In (203.2mm) x 1/4 In (6.35mm), 48 In (1219mm) high (+cap)
Anchor base plates are 12 In (304.8mm) x 42 In (1067mm) x 1/2 In (12.7mm) with eight (8) anchor points
Anchor post assemblies is zinc plated and finished in powder-coat full gloss super polyester

Accessories