9024 Residential and Commercial

DC Slide Gate Operator Battery Back-up & Solar Power

The 9024 can run exclusivly on AC power with battery backup, or solely on solar power.

The DKS DC Slide Gate Operator is a great option where backup power is critical, as it’s designed to keep running when AC power has been lost. The solar power version is ideal in applications where AC power is unavailable, with the option to add your own solar system for power, or you can use the DKS solar kit.

The DKS 9024 DC Slide Gate Operator offers powerful, yet safe, multifunctional operation all in a small, compact design – ideally suited for residential or commercial applications.

Find A Dealer

For further details, see this short animation

Gate Tracker™

Provides Operator data to companion access controller (DKS 1 1835, 1837, 1838). http://doorking.com/reporting

Quadra Drive

DC motor for longer life.

“T-Handle” Release

For easy manual open or close.

Full Size Gearbox

Heavy-duty 30:1 ratio gearbox.

Battery Backup

Built-in (7.2 Ah battery x2)

Slide Gate Operator - Residential and Commercial DC Gate Operator

Main Tabs

Overview

The new DKS 9024 Slide Gate Operator keeps running when AC power has been lost. The solar power version is ideal in applications where AC power is unavailable and allows you to add your own solar system for power, or you can choose the DKS solar kit. This slide gate operator offers convenience, reliability and safe operation in a small, compact design and is ideally suited for residential or commercial applications. The 1/2 HP Quadra Drive DC Motor provides powerful and long lasting operation and is backed up with built-in 7.2 Ah batteries to provide operation if AC power is interrupted. The 9024 features a belt drive/30:1 gear-box reduction system to provide powerful, yet extremely quiet, slide gate operation. The 9024 uses an advanced microprocessor control circuit with outstanding features. Designed with versatility in mind, the DKS Model 9024 provides everything you expect from a gate operator in this class – and more.

*Assumes a 16 foot gate weighing 1000 Lbs. Other external factors (temperature, charge state of batteries, gate weight, gate length, etc.) will affect the performance of the gate operator and may reduce the number of cycles shown.

You may qualify for a 26% tax credit off of the cost of the Solar Only gate operator P/N 9024-081

Specs

Features:

Two 7.2 Ah Batteries
Powerful 1/2 HP Quadra Drive motor for long life
Heavy-duty gearbox
Heavy-duty steel frame provides strength and quiet operation
“T-Handle” release is easily accessible from front of operator
Operator re-connects automatically when handle is released
Adjustable limit nuts for precise gate control
Auto-close timer 1-30 seconds
Simple bi-parting gate interface (AC powered operators only)
Selectable loop/reverse input function; stop or reverse
Anti-tailgating feature helps to control un-authorized traffic
Standard normally closed stop circuit
DC Power Shut-Off switch
Battery protection circuit
Ports for plug-in open and reverse loop detectors – DKS detectors only
Gate Tracker reporting output provides operator data to access control system (DKS 1833, 1835, 1837 or 1838 only)
AC Powered Operator Only - 115 VAC Convenience outlets, and AC Power Shut-Off switch.
DC Powered Operator Only - 0.0 Amp SBPD(Pat Pend) Circuit insures longer battery life.

Specifications:

Maximum gate width 40 ft. (12.2 m)

Maximum gate weight 1000 pounds (453.6 m). (Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

1/2 HP Quadra Drive motor, continuous operation with AC source power available.

With battery backup approximately 40 cycles with 7.2 Ah Batteries, 150 cycles w/18 Ah Batteries. Assumes a 16-ft, 1000 Lb gate.

Other external factors (temperature, charge state of batteries, gate weight, gate length, etc.) will affect the performance of the gate operator and may reduce the number of cycles.

115, 230 VAC input: 1.8 A / 0.9 A or 24 VDC Input 8.0 A.

Class I, II, III, IV applications

Compliant with UL 325 and 991, ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices are required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

Dimensions: 16.75"W x 28"H x 19"D (42.5cm W x 71cm H x 48.3cm D)

Options:

18 Ah Batteries, AC powered operator only (2 required)

Plug-in loop detectors

Heater kit for cold environments (AC powered operators only)

Secondary entrapment prevention devices

Bi‐parting gate connection cable

Gate operator control stations

Postal and Fire Dept lock boxes

Surge suppressors, time clocks, traffic signal

Steel base plate for post mount

Solar Kit (includes two 18 Ah batteries and 10 Watt, 24 VDC solar panel)