Swing Gate Accessories

Flange Bearing Hinge

• 1200-009 3000 Lb. wieght capacity
• 1200-010 replacement bearing
• The DKS Swing Gate Hinges are designed for heavy wrought iron gates
• Two are used at the extreme top and bottom of the gate
• Zert grease fitting
• Includes mounting bracket and hardware
• Two required per gate (top, bottom.
• Designed for use with 2” gate frame

Sealed Bearing Hinge

• 1200-019 2000 Lb. weight capacity
• 1200-039 3000 Lb. weight capacity
• Includes mounting bracket and hardware
• Two required per gate (top, bottom)
• Designed for use with round or square gate frames

Torsion Rod Assembly

• Counter‐balances uphill swing gates
• 1203-084 includes top bracket, bottom bracket and one (1) torsion rod
• 2600-299 additional torsion rods. Up to five (5) additional torsion rods can be added

Uphill Arm Pivot Assembly

• Used to connect Operator arm when the Operator has been installed horizontally level and the gate opens on an uphill or downhill slope
• 6500-490 for use with 6050, 6100, 6300, and 6500 operators
• 6550-490 for use with 6550 operator
• Should be used with 1203-084 Torsion Rod Assembly

Base Plates

• 2600-664 Concrete base plate - use to mount 6050 or 6100 post mount operators onto an existing concrete pad
• 2600-260 Mounting pipe - use with 6050 and 6100 post mount operators. 2-1/2 O.D. x 3 ft. pipe, threaded on one end
• 6500-490 Uphill Arm Ppivot Assembly - sue with 6050, 6100, 6300, and 6500 operators when the gate opens on an uphill slope. Should be used with 1203-084 Torsion Rod Assembly
• 9310-201 Steel base plate - use with 9310 1/2 HP operators
• 9310-202 Steel base plate - use with 9310 1 HP operators

Bi-Parting Connection Cable

• 2600‐754 Primary / Secondary Cable - 500 ft. roll
• 2600‐755 Primary / Secondary Cable - 30 ft. roll
• 2600‐756 Primary / Secondary Cable - 40 ft. roll
• 2600‐757 Primary / Secondary Cable - 50 ft. roll

• 2600-770
• 14 oz. tube Molybdenum Disulfide (Moly D) multi-purpose grease for swing gate worm gears