Training

DoorKing Training Workshops & Webinars

Webinars are presented on Tuesdays and Wednesdays. Please check the links for presentation times and subject matter. Webinars are free of charge.

In Person Training Workshops are two days in length and are taught in person by DoorKing technical personnel at various locations throughout the country. Prior registration is required for these work shops - no walk-ins are allowed. Please check the links for upcoming locations. There is a $40.00 fee for these two-day workshops. COVID protocols will be in affect per State and Venue (hotel) requirments.

If you have COVID-19 symptons, or if you have tested positive for COVID-19 but have no symptoms, do not attend the seminar unless:

At least 10 days have passed since your symptons began, and
Your fever has been gone for 24 hours without the aid of medication, and
Your symptons have improved

If you have had close contact with someone who has COVID-19, you may attend if:

You are fully vaccinated, or recovered from COVID-19 in the last 90 days, and
You do not have symptoms

Webinars

Tuesday - Next Date TBD
DoorKing 3G Upgrade Program.
AT&T began to shut down their 3G network on February 22nd. This may affect your DoorKing cellular device. This webinar will show you how to determine if your device will be affected and what to do if it is affected. Act NOW to avoid any disruption with your DoorKing cellular service.

To register for a webinar, click on a link below.

Wednesday - Next Date TBD.
Welcome to the Cloud!
Changing the way DoorKing databases are managed.

To register for a webinar, click on a link below.

In-Person Training Workshops

Two-Day Hands-On Workshops
These workshops provide training to install, operate and maintain DoorKing access control and vehicular gate operating products. All of our training workshops include updates on UL 325, ASTM F2200 and UL 294 standards as they apply to DoorKing products so that installers and system designers are up to date on current industry safety standards and requirements. Two day training workshops begin promptly at 7:30 AM and continue to approximately 4:00 PM each day (unless otherwise), so be prepared for two full days of training. Workshop class size is limited to 60 persons and they do fill quickly, so register at your earliest convenience. Prior registration is required - walk-ins are not allowed. Registration fee is $40.00 per person, which includes breakfast and lunch each day. Click on the date to register.

San Jose, CA
June 7-8(link is external)

Houston, TX
June 21-22 (SOLD OUT)

Orlando, FL (Two sessions)
July 12-13(link is external)
July 14-15(link is external)

Baltimore, MD
August 16-17(link is external)

Chicago, IL
TBD

Busted Knuckles training workshops
offer an advanced hands-on experience for those who want more in depth training on DoorKing gate operators or software programs and cloud applications. These are hands-on, so be prepared to get dirty! Click a Busted Knucjkles link for more information. Busted Knuckles are one (1) day advanced training workshops for persons who want a more in depth study of DoorKing gate operators or software programs and cloud applications. Training begins at 7:30 AM and continues to approximately 4:00 PM. Class size is limited to 25 persons max, so register early (click on the Busted Knuckles program to register). Registration fee for Busted Knuckles training is $25.00 per person and includes breakfast and lunch.

Locations and registration links will be posted soon.

Continuing Education
DoorKing live training workshops and webinars* are recognized by the ACI and IDEA and allow you to earn continuing education hours to maintain your ACI and IDEA certifications. Continuing Education (CE) hours awarded are dependent on the training program you attend and the length of that program.
* You must be present for the entire webinar to earn CE hours. Attendance and polling questions are used to insure your presence throughout the webinar.

DKS Brochure

Hands-on Workshops 2-Days

The two-day hands-on workshop offers training focusing on DoorKing gate operators, telephone entry and access control systems and is very useful to train technicians on the emerging technologies in telecommunications, including cellular, VoIP and other wireless technologies. These are full day sessions that focus on installation, wiring and programming, with attendees working with live equipment.

Class	Description
`Who Should Attend:`	Hands-on for installers and dealers
`Setting:`	2 full days - Round table stations with sets of product for each station
`Instructors:`	DKS Regional Managers and Factory Specialists
`Where:`	Nationwide
`When:`	Calendar
Course registration is required. Course Fees: $40 per person. Please note that there are no refunds for any cancellations 72 hours or less prior to the event.

2-Day Course Agenda
Day 1	Access Control Workshop: Attendees work with an 1830 series controller, card readers and tracker boards to build a working access control system.
Day 2	Gate Operator Workshop: Work stations are set up with various DoorKing gate operator models. Attendees will wire various types of controls and accessories into the gate operator to set up a fully functional gate system.
* When the two Full Day Sessions are combined, attendees will tie their access control system from Day 1 into the gate system for a fully interactive system.

Busted Knuckles Workshops 1-Day*

Busted knuckles are hands-on advanced training programs for either gate operator systems or access control software programs and cloud applications. These training programs are designed for persons familiar with DoorKing products, but are seeking more in depth and focused training.

Class	Description
`Who Should Attend:`	Hands-on for installers and dealers
`Setting:`	Software training goes beyond the standard required data entry (name, telephone number, entry code) and simply getting the gate or door to open. Learn how to implement real world scenarios with different permission and security levels, enable elevator control, setup holiday schedules, create reports, and manipulate the database to fine tune it for your needs. Gate operator training includes electrical and mechanical troubleshooting, component level removal and replacement and mechanical service / maintenance requirements.
`Instructors:`	DKS Regional Managers and Factory Specialists
`Where:`	Nationwide
`When:`	Calendar
Course registration is required. Course Fees: $40 per person. Please note that there are no refunds for any cancellations 72 hours or less prior to the event.

1-Day Course

Advanced Software

Advanced software training will focus on high level set up and features with an emphasis on real world scenarios.

You will learn how to setup different security and permission levels for different people, how to enable elevator control, become and expert at creating reports, learn how to import and export databases in csv format and create automatic backups. You will be provided with a mock application that will require several different permission levels to be established with time zones and elevator control, all using a combination of different access devices.

This training program is hands-on. A Windows based laptop is required (or a Mac running Windows emulation software).

Gate Operators

The workshop is broken down into operator modules; AC operator models 6100/6300 swing gate and 9100/9150 slide gate and DC operator models 6524 swing gate and 9024 slide gate. There is also a separate module on the 1600 series barrier gate operators.

Attendees will learn how to troubleshoot and service these operators at the component level. This advanced training includes in depth discussions on electrical and mechanical troubleshooting, circuit board programming options, installation issues, maintenance and availability and installation of optional devices such as heaters, high-voltage kits and installation options available.

This training program is hands-on, so be prepared to get dirty. Bring your tools and test equipment (Multi-meters) that you would use in a typical work day.

* Busted Knuckles are separate workshops, you cannot attend both on the same day. Please register for only one workshop.

Distributor Days

These are typically a half or full day, held at the distributor's location. They are not hands on, but more informative in nature. Ordinarily the Regional Manager will use power points and handouts to focus on selected products or product groups.

Distributor Days are great ways for Dealers to keep up on new products and get valuable training for sales and technical staff. These seminars may include product demonstrations.

Class	Description
`Who Should Attend:`	Installers, sales and office personnel
`Setting:`	Classroom style (half or full day)
`Instructors:`	DKS Regional Sales Manager & Distributor Representatives
`Where:`	Over 100 distributor locations nationwide
`When:`	Calendar
Course Fees: Free - please contact your Distributor for more information.

Regional Seminars

This is a full day classroom seminar held at a Hotel meeting facility. These seminars provide information on new products as well as valuable sales and technical training on various DoorKing systems. There are various modules available for these regional seminars, including:

Gate Operator Service, Trouble Shooting, & Maintenance
Gate Operator Installation • Parking Gate and P.A.M.S. systems
Telephone Entry Installation
Understanding Cellular, Internet (VoIP) and other connection methods
1812 and 1812 AccessPLUS systems
1830 Series Access Control Workshop
Wireless Expansion - setting up and troubleshooting
Software Programming and Networking
Understanding industry safety standards, UL325, ASTM F2200 and others

* Each Regional Seminar will focus on 2 or 3 of these modules as may be appropriate for the region.

Class	Description
`Who Should Attend:`	Installers, sales and office personnel
`Setting:`	Full day - Hotel meeting room classroom style
`Instructors:`	DKS Regional Sales Managers & Factory Specialist
`Where:`	Over 100 distributor locations nationwide
`When:`	Calendar
Course registration is required. Course Fees: Free, contact your DoorKing Regional Sales Manager for information.

Certifications for Automated Vehicular Gate Industry Professionals

Two independant agencies provide certifcation credentials for persons in the automated vehicular gate systems industry. The Accreditation and Certification Institute (ACI) offers Gate Automation Designer and Gate Automation Technician certifications. The Institute for Dealer Education and Accreditation (IDEA) offers Automated Gate Systems Designer, Automated Gate Operator Installer and Automated Gate System Technician Level 1 certifications.

ACI

IDEA