Access Control Solutions

Since 1948

Mounting Posts & Kiosks

  • Several different styles of Mounting Posts and Kiosks available
  • All mounting posts are finished in a baked-on enamel finish
  • Mounting Kiosks are ideal for walk-up pedestrian applications

Several styles of mounting posts are available from DKS. Architectural and designer style posts are typically used with the larger telephone entry systems and are available in gooseneck styles for vehicular traffic or straight styles for walk-up pedestrian use. The mounting kiosks are ideal for walk-up pedestrian applications and are designed for DKS flush mount telephone entry systems only. Both the designer style post and the walk-up kiosk include an accessory compartment that can house accessory transformers, surge supressers and a radio receiver. Additionally, the designer style post has an optional light tower that can be added to them. The standard posts are used with card readers, keypads and smaller access control devices.  A dual-height style is also available for applications that have both vehicular and truck traffic.  

Models

Exit Button

Standard
1200-045

Keyswitch

Architectural
Offset Small
1200-036

Keyswitch

Architectural
Offset
1200-037

Three Button

Architectural
Straight
1200-050

Keypad

Standard
Dual Height
1200-049

Gate Control

Designer
Straight
1200-085

Gate Control

Designer Straight
With Light Tower
1200-087

Gate Control

Designer
Offset
1200-086

Gate Control

Designer Offset
With Light Tower
1200-087

Gate Control

Kiosk 1200-160

Gate Control

Kiosk 1200-170

Gate Control

Kiosk 1200-175

Gate Control

Post Mount Adapter Plates

 

Specifications

STANDARD POST

  • Pad mount or in-ground mount styles available.
  • Constructed from 2 x 2 steel.
  • 42-inches tall to bottom of mounting plate (pad mount).
  • Sweeps out approximately 12-inches.
  • Pad mount style includes mounting plate and mounting plate cover.
  • In ground mount unit is 64-inches overall length.

ARCHITECTURAL STYLE POST

  • Pad mount. In-ground adapters are available.
  • Constructed from 4 x 4 steel.
  • Gooseneck (offset) style is 36-inches to the bottom of mounting plate and angles out approximately 14-inches.
  • Straight style is 46-inches to the bottom of mounting plate.
  • Small gooseneck (offset) style is 41.75-inches to top of small mounting plate.

DESIGNER STYLE POST

  • Pad mount. In-ground adapters are available.
  • Constructed from 4 x 8 steel.
  • Offset style is 50-inches tall and angles out approximately 14-inches.
  • Straight style is 60-inches tall, 44-inches to the bottom of mounting plate.
  • Accessory compartment includes four (4) 115 VAC convenience outlets and space for up to three (3) surge suppressers and an RF receiver.

DESIGNER POST LIGHT EXTENSION

  • Order with light or add your own.
  • Adds 48-inches to top of designer style posts.
  • RF coax antenna mounting hole.

DUAL HEIGHT POST

  • Pad mounting style only.
  • Base post is constructed from 2 x 4 steel.
  • Upper post is constructed from 2 x 2 steel.
  • Two 12-inch sweeps.
  • 42-inches tall to bottom of lower mounting plate.
  • 72-inches tall to bottom of upper mounting plate.
  • Pad mount style includes mounting plate and mounting plate cover.

MOUNTING KIOSKS

  • Designed for use with Flush Mount systems only.
  • Kiosks are pad mounted.
  • Locked accessory compartment holds four (4) transformers, three (3) surge suppressors, and a radio receiver.
  • All models include ultra-bright LED lighting to illuminate entry system.
  • 1200-160 model - 60” high x 13” wide x 9” deep. Use with DKS 1802 and 1802-EPD Flush Mount units only.
  • 1200-170 model - 60” high x 18.5” wide x 10” deep. Use with DKS 1803, 1810, 1833, 1834, 1835, 1837 Flush Mount units only.
  • 1200-175 model - 60” high x 18.5” wide x 10” deep. Use with DKS 1812 Classic, 1812 Plus and 1812 Access Plus Flush Mount units only.

 

Options
  • Light tower - 4 x 8 steel (45 Lbs)
    Adds 48 inches to top of heavy-duty designer style posts only
    Light sensor automatically turns light on at dusk, off at dawn
    RF coax antenna mounting hole
  • In-ground adapters
    All adapters are 24 inches tall sized to match their respective posts
    All adapters have 6 inch tall conduit access on side, 6 inches from mounting plate
    All adapters include 1/2 - 13 x 2 inch long mount bolts
  • Adapter plate 1802-111
    Use with 1200-036, 1200-045, 1200-046, 1200-049 mounting posts to mount 1802, 1802-EPD, and 1819 telephone entry systems to these posts