Access Control Solutions

Since 1948

1610 Traffic Spikes

  • Surface mount spikes install easily without trenching and double as a speed bump
  • Spring loaded surface mount available in 3 foot sections
  • Flush Mount below ground assembly available with weighted or spring loaded spikes

Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entry location. Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lanes. Flush mount spikes are available with Spring Retraction or with Weighted Retraction. Speed bumps force drivers to slow down while driving through the controlled entry point. They are also ideal for keeping vehicular traffic at a safe speed while driving over traffic spikes.

Styles

Flush Spikes

Flush Spikes

Surface spikes

Surface Spikes

Speed bump

Speed Bump

 

Specifications
Flush Mount Traffic Spikes
  • Individual spring loaded spikes.
  • Stainless steel springs.
  • Weight spikes (no springs) version available.
  • Lock-down version available.
  • Flush in-ground unit.
  • Painted bright red for easy visibility.
  • Ideal to enforce one-way traffic.
  • Dimensions: 6.5"H x 12.5"W x 72"L.   Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
  • Speed bumps should always be used with traffic spikes.   Speeds in excess of 5-MPH over the spikes can cause tire damage.
Speed Bumps
  • Speed bumps are constructed from solid composite material.
  • Speed bumps can be easily removed and re-installed.
  • Painted bright yellow for easy visibility.
  • Designed for installation on concrete surfaces only.
  • Dimensions: 2"H x 11.5"W x 72"L.
Surface Mount Traffic Spikes
  • Spikes sections available in 3-foot sections.
  • End caps provide a smooth end to the spike section.
  • Torsion springs.
  • Lock-down standard.
  • Surface mount unit.
  • 1/4-inch diamond plate painted bright yellow for easy visibility.
  • 3-inch rise provides a built-in speed bump.
  • Dimensions: 3"H x 31"W x 36"L.   Warning signs must be used with traffic spikes to warn drivers that a one-way traffic lane condition exist.
  • Speed bumps should always be used with traffic spikes.   Speeds in excess of 5-MPH over the spikes can cause tire damage.
Options
DC powered convenience open.
14-foot round (3" dia) aluminum arm.
14-foot 1 x 3 inch wood arm.
Arm folding bracket assembly for low headroom (wood arm only).
Foam padding for arms.
Heater kit.
Fan kit.
Surge suppressors.
Plug-in loop detectors.