DoorKing Parking Control Products - Access Control Solutions

DoorKing Power Inverter / Backup

Parking Control

1601 Barrier Gate
1602 Barrier Gate
1603 AutoSpikes
1610 Warning Sign & Traffic Signal
1610 Traffic Spikes
Power Back-up


Download

Literature (ENG)
Literatura (SPA)
Instructions

The Model 2000 acts as a power distribution panel during normal operation and supplies back-up power to the load when primary (AC) power fails.

Six (6) 20-amp circuit breakers provide protection for the external loads.

Cabinet contains room for two (2) batteries (batteries are not included with the system).

DoorKing 2000 Power Inverter & Backup System

The Model 2000 Power Inverter is designed to provide backup power for a complete parking and access control system when primary (AC) power fails. The model 2000 is not just another DC backup system. This unit converts DC battery power to AC power to keep your system operable at all times. The system acts as a power distribution panel during normal (AC) operation and supplies backup power to the load during power outages. This capability ensures that the parking and access control system remains operable during power outages and is ideal for any application where maintaining the parking and access control system is critical. These applications include high security needs, government and military installations, parking garages, apartment complexes and gated communities.

Click here to find a dealer near you:

Backup Inverter

18.625"W x 45.5"H x 17.25"D

ADVANCED FEATURES

Three-stage battery charging maintains proper battery voltage without over charging the batteries.
RMS regulation ensures loads have the same amount of power as battery voltage changes.
Provides a modified sine-wave output suitable for a variety of applications.
Electronic control circuit monitors battery voltage while system is in inverter mode and commands up to six gate operators to open sequentially when battery power reaches critical levels.

SPECIFICATIONS

Operating temperature: 32°F to 104°F
Modified sine wave output.
Maximum 5% voltage regulation (2.5 % typical).
Frequency regulation 60 Hz (within 4%).
120 VAC output voltage.
3-stage charging.
Temperature compensation probe included.
Charger to inverter: 32-millisecond transfer time.
Inverter to charger: 40-seconds.
ETL Listed.
18.625"W x 45.5"H x 17.25"D

OPTIONS

1500 Watt, 12.5 Amp maximum load.
2400 Watt, 20 Amp maximum load.
3600 Watt, 30 Amp maximum load.

The model 2000 requires two (2) 12-volt, Deep Cycle batteries connected in series to provide 24-volt DC input to the system. Batteries are not included with the model 2000.

The amount of time that the model 2000 can provide backup power to the system is determined by many factors including: the number of operators being powered, amount of usage, amperage draw, size of batteries, wire size, wire run distance, temperature, etc.