DoorKing Gate Operator Systems - Access Control Solutions

DoorKing 9500 Series Slide Gate Operators

Gate Operators

1150 Overhead
6002 Light Duty Actuator
6003 Residential Actuator
6050/6100 Residential and Commercial
6300 Commercial and Industrial
6400 In-ground
6500 Commercial and Industrial
9050 Residential
9100 Commercial
9150 Commercial and Industrial
9210, 9220, 9230 Variable Speed
9500 Maximum Security
9310 Commercial and Industrial
Accessories
>>V-Wheel
>>Interior Access


Download

9500 (ENG)
Literatura (SPA)
Instructions
Quickstart Instructions

Designed for large maximum security gates weighing up to 20,000 Lbs.

Direct driven limit switches cannot be tampered with externally

circuit board Advanced circuit board with LED readouts & built in diagnostics

#100 roller chain provides a no slip mechanical connection to the gate

DoorKing 9500 Series Maximum Security

The DKS 9500 series operators are designed to operate very heavy vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators should never be used in applications serving the general public. The 9500 series uses a high tensile steel alloy #100 roller chain as the pulling medium, which is immune to slippage and simplifies installation. These operators include a speed control module which allows the user to set the speed of the gate from 1/2 to 4 feet/sec., and have a slow-start and slow-stop function as well.

Click here to find a dealer near you:

Videos

9500 Series

54"W x 59"H x 26 "D

ADVANCED FEATURES

Speed control module.
Slow start / slow stop.
Direct driven limit nuts.
Anti-tailgating feature.
Adjustable partial open..
Gate tracker reporting output.
Built-in diagnostics.
Ports for plug-in loop detectors.
Selectable stop / reverse loop functions.
Two convenience outlets.
Fail-secure operation includes crank for manual operation.
Programming switches.
Built-in 3-button control (open-close-stop)
Built-in power On/Off switch.

SPECIFICATIONS 9500 Series

Maximum gate length 160-feet.
Maximum gate weight 10,000 and 20,000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
Adjustable speed: 1/2 - 2 Ft./sec or 1/2 - 4 Ft/sec (dependant on model).
10:1 or 40:1 gear reduction running in a continuous oil bath (dependant on model).
Self adjusting disc brake with manual release (high speed models only).
3 or 5 HP continuous-duty motor.
230 VAC single-phase (dependant on model) and 230 / 460 VAC three-phase.
Operator is shipped with chain brackets and 20-feet of #100 chain.
Class III and IV applications only.
Compliant with UL 325 and 991 - but not yet listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions: 54 "W x 59 "H x 26 "D

OPTIONS AVAILABLE WITH THESE OPERATORS

Plug-in loop detectors.
Gate Tracker reporting (DKS 1833, 1835, 1837 or 1838 access controllers only).
Chain tray (recommended on gates exceeding 20-ft in length).
Non-contact and/or contact sensing devices.
Stop - Go traffic signal.
Heater kit for cold environments.
Surge suppressors.