DoorKing Gate Operators - Access Control Solutions

DoorKing 9310 Slide Gate Operator

Gate Operators

1150 Overhead
6002 Light Duty Actuator
6003 Residential Actuator
6050/6100 Residential and Commercial
6300 Commercial and Industrial
6400 In-ground
6500 Commercial and Industrial
9050/9070 Residential and Light Commercial
9100 Commercial
9150 Commercial and Industrial
9210, 9220, 9230 Variable Speed
9500 Maximum Security
9310 Commercial and Industrial
Accessories
>>V-Wheel
>>Interior Access


Download

Literature (ENG)
Literatura (SPA)
Instructions

convenience outlets For plug-in accessory
transformers

plexi schematic wire connections are made simple with “plexi” schematic

forced entry lock

chain drive Front or rear mount

DoorKing 9310 Commercial and Industrial

The Model 9310 operator is designed to operate vehicular slide gates in residential and commercial applications. The 9310 is designed so that it can easily be mounted in the front or rear of the gate without any costly and time consuming field modifications. This operator is designed to be pad mounted. The 9310 is available in 1/2 or 1 HP versions and can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Click here to find a dealer near you:

9310 1/2 HP

9310 1 HP

21.5"W x 27.5"H x 16.5"D

28.5"W x 27.5"H x 16.5"D

ADVANCED FEATURES

Direct driven manual limits.
Power Start circuit (1/2 HP only).
Anti-tailgating feature.
Gate tracker reporting output.
Ports for plug-in loop detectors.
DC Powered convenience open (optional).
Two convenience outlets.
Fail-safe release (fail-secure optional).
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.

SPECIFICATIONS Model 9310 1/2 HP

Maximum gate length 30-feet.
Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. If DC Convenience Open option is installed, maximum gate weight is 800 pounds. Other external factors may affect the performance of the gate operator.)
10:1 gear reduction running in a continuous oil bath.
1/2 HP continuous-duty motor.
115, 208, 230, 460 VAC*. (*208, 230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
Operator is shipped with chain brackets and 20-feet of #40 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions: 21.5"W x 27.5"H x 16.5"D

SPECIFICATIONS Model 9310 1 HP

Maximum gate length 45-feet.
Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. If DC Convenience Open option is installed, maximum gate weight is 1300 pounds. Other external factors may affect the performance of the gate operator.)
10:1 gear reduction running in a continuous oil bath.
1 HP continuous-duty motor.
115, 230 VAC single-phase, 208, 230 VAC three-phase.
Operator is shipped with chain brackets and 20-feet of #40 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions: 28.5"W x 27.5"H x 16.5"D

OPTIONS AVAILABLE WITH THIS OPERATOR

DC powered convenience open.
Nickel plated chain.
Stainless steel chain.
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.