DoorKing 9210 Slide Gate Operator
Gate Operators

1150 Overhead
6002 Light Duty Actuator
6003 Residential Actuator
6050/6100 Residential and Commercial
6300 Commercial and Industrial
6400 In-ground
6500 Commercial and Industrial
9050/9070 Residential and Light Commercial
9100 Commercial
9150 Commercial and Industrial
9210, 9220, 9230 Variable Speed
9500 Maximum Security
9310 Commercial and Industrial
Accessories
>>V-Wheel
>>Interior Access
 
Download
 
9210
 
Download
 
9220
 
Download
 
9230
 
   
safety interlocked crank, for manual operation. External power & alarm reset switches
   
easy access Easy access to the mechanical features of the 9200 is simplified with swing out electrical panel
   
circuit board Advanced circuit board with LED readouts & built in diagnostics
   
plexi schematic Wire connections are made simple with “plexi” schematic
 
Maximum Security Slide Gate Operators 9210, 9220, 9230
Maximum Security Slide Gate Operators 9210, 9220, 9230

DoorKing's Maximum Security operators are designed to operate vehicular slide gates in limited (Class III) and restricted (Class IV) applications only.   These operators should never be used in applications serving the general public.   These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications.   Center mounting the operator requires an optional pedestal mounting base. The speed control on the 9220 and 9230 models allows the user to set the speed of the gate from 1/2 to 2 feet/sec., and provides slow-start and slow-stop functions as well.

Click here to find a dealer near you:

Max Sec Operators
16"W x 34"H x 16"D
Max Sec Operators

ADVANCED FEATURES

 
  • Direct driven limit nuts.
  • Anti-tailgating feature.
  • Adjustable mid-stop.
  • Gate tracker reporting output.
  • Ports for plug-in loop detectors.
  • Two convenience outlets.
  • Fail-secure operation includes crank for manual operation.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.

SPECIFICATIONS Model 9210

 
  • Maximum gate length 100-feet.
  • Maximum gate weight 3000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware.   Other external factors may affect the performance of the gate operator.)
  • 40:1 gear reduction running in a continuous oil bath.
  • 1 HP continuous-duty motor.
  • 115, 208, 230 VAC single-phase, 208, 230 VAC three-phase.
  • Operator is shipped with chain brackets and 20-feet of #50 chain.
  • Class III and IV applications only.
  • Compliant with UL 325 and 991.   ETL Listed.   (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions: 16"W x 34"H x 16"D

SPECIFICATIONS Model 9220

 
  • Maximum gate length 100-feet.
  • Maximum gate weight 2000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware.   Other external factors may affect the performance of the gate operator.)
  • Adjustable solid state speed control, 1/2 to 2 Ft./sec.
  • Slow start / slow stop function.
  • 40:1 gear reduction running in a continuous oil bath.
  • 1 HP continuous-duty motor.
  • 208, 230 VAC single or three-phase.
  • Operator is shipped with chain brackets and 20-feet of #50 chain.
  • Class III and IV applications only.
  • Compliant with UL 325 and 991 - but not yet listed.   (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions: 16"W x 34"H x 16"D
 

SPECIFICATIONS Model 9230

 
tbl
  • Maximum gate length 100-feet.
  • Maximum gate weight 5000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware.   Other external factors may affect the performance of the gate operator.)
  • Adjustable solid state speed control, 1/2 to 2 Ft./sec.
  • Slow start / slow stop function.
  • 40:1 gear reduction running in a continuous oil bath.
  • 3 HP continuous-duty motor.
  • 208, 230 VAC three-phase.
  • Operator is shipped with chain brackets and 20-feet of #60 chain.
  • Class III and IV applications only.
  • Compliant with UL 325 and 991 - but not yet listed.   (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions: 16"W x 34"H x 16"D
 

OPTIONS AVAILABLE WITH THESE OPERATORS
 
tbl

#60 chain (9210, 9220 only)
Heavy-duty pedestal mounting stand. (Recommended for gates over 30-feet to allow use of a chain support rail).
Stop - Go traffic signal.
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.
 
   
   
 
Los Angeles Website Design by Dogs of Design Studios