DoorKing 9100 Slide Gate Operator
Gate Operators

1150 Overhead
6002 Light Duty Actuator
6003 Residential Actuator
6050/6100 Residential and Commercial
6300 Commercial and Industrial
6400 In-ground
6500 Commercial and Industrial
9050/9070 Residential and Light Commercial
9100 Commercial
9150 Commercial and Industrial
9210, 9220, 9230 Variable Speed
9530, 9550 Maximum Security
9310 Commercial and Industrial
Accessories
>>V-Wheel
>>Interior Access
 
Download
 
 
   
plexi schematic Wire connections are made simple with ”plexi” schematic
   
self adjusting Maintenance free electronic magnetic limits simplify installation and eliminate mechanical switch adjustments
   
swing up circuit boardsand modular design, adjustments and replacement of any part can be made easily in minutes without the need of dismantling the operator
   
partial open feature allows long gates to open 14 feet for automobile traffic, or opens gate fully for large trucks or oversized vans
 
DoorKing 9100 Commercial

The Model 9100 operator is designed to operate vehicular slide gates in residential and commercial applications.   The 9100 is designed so that it can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications.   In addition, the operator can be pad or post mounted to meet any installation requirements.
9100 Commercial
12"W x 24"H x 11.5"D
9100

ADVANCED FEATURES
 
  • Self-adjusting, no maintenance magnetic limits.
  • Partial-open feature.
  • Anti-tailgating feature.
  • Gate tracker reporting output.
  • Ports for plug-in loop detectors.
  • Two convenience outlets.
  • Fail-safe release (fail-secure optional).
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.

SPECIFICATIONS
 
Model 9100
  • Maximum gate length 30-feet.
  • Maximum gate weight 1000 pounds*.   (*Assumes gate is on level ground, in good condition with properly adjusted hardware.   Other external factors may affect the performance of the gate operator.)
  • 1/2 HP continuous-duty motor.
  • 115 VAC, 5.4 Amps.
  • Operator is shipped with chain brackets and 20-feet of #41 chain.
  • Class I, II,   III and IV applications.
  • Compliant with UL 325 and 991.   ETL Listed.   (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions: 12"W x 24"H x 11.5"D

OPTIONS AVAILABLE WITH THIS OPERATOR

 
#40 chain.
Nickel plated chain.
Stainless steel chain.
Plug-in loop detectors.
Heater kit for cold environments.
Base plate to post mount this operator (does not include posts).
Surge suppressors.