Proximity Card Readers
- Reads Multiple Types of Cards and Tags - Full line available as passive or active.
- Read tags up to 30-feet away using active tags.
- Indoor applications to control access to secure areas.
- Card reader can also be mounted on an enclosure for outdoor applications.
A unique feature of the DKS proximity card reader product line is that the card readers are compatible with both passive and active tags. This allows a mixing of different cards and tags to achieve desired read ranges in different locations without having to install a second card reader or carry two tags. These readers feature a cosmetically appealing design that will blend with any architectural design and offer high durability and reliability.
AVI (or Automated Vehicle ID) systems operate in the same manner as proximity card systems, but with longer ranges. A typical AVI system places a tag on the vehicle, rather than having the user carry it. In this manner, a gate system will open automatically as the vehicle approaches with a properly credentialed tag. This provides convenience and is ideal in applications where only authorized vehicles are allowed entry.
Models
Model 330
Enclosure Assembly
Model 1815-302
Small
Model 1815-300
Mullion
Model 1815-301
Single Gang
Access Cards
Features
- Because physical contact is not required, proximity cards can transmit their data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal.
- Proximity card readers are maintenance free. There are no parts to wear out or adjust.
- Passive card technology provides and unlimited number of "card reads" with no battery to wear out. Active cards provide a much longer read range, but use a battery that will require replacement in time (2-years approximately).
- Passive cards, unless they are physically abused, will last virtually forever.
- Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application.
Specifications
Cards
DK Cards / Key Tags
These cards will work with the following DK Prox readers only: 1815‐300, 1815‐301, 1815‐302, 1815‐330, 1815‐331, 1815‐305
Cards are sold in blocks of 50 only.
- DK Prox Cards.
These cards are factory pre‐coded. Card numbers may, or may not be, in numerical sequence.
1508‐120 Clamshell Cards
1508‐121 ISO Graphics Cards
1508‐123 Key Tags - DK Prox Cards ‐ Special Order
These cards include sequential coding, specific card numbers and specific start / stop numbering sequences.
1508‐127 Clamshell Cards
1508‐128 ISO Graphics Cards
1508‐129 Key Tags
AWID Prox Cards
Cards are sold in blocks of 50 only (except LR 2000 Tags).
- AWID Prox Cards.
These cards are factory pre‐coded. Card numbers may, or may not be, in numerical sequence.
1508‐020 Prox‐Linc Clamshell Cards
1508‐021 Prox‐Linc GR ISO Graphics Cards
1508‐022 Prox‐Linc KT Key Tags - AWID Prox Cards ‐ Special Order.
These cards include sequential coding, specific card numbers and specific start / stop numbering sequences.
1508‐132 Prox‐Linc Clamshell Cards
1508‐133 Prox‐Linc GR ISO Graphics Cards
1508‐134 Prox‐Linc KT Key Tags
LR 2000 Tags (use with 1815‐160 only)
1815‐164 (Visor Tag)
1815‐165 (Rear View Mirror Tag)
1815‐166 (Windshield Tag)
HID Prox Cards
Cards are sold in blocks of 50 only (except 1508‐014 ProxPass tags).
- HID Prox Cards.
These cards are factory pre‐coded. Card numbers may, or may not be, in numerical sequence.
1508‐018 ProxCard II Clamshell Cards
1508‐017 Prox II ISO Graphics Cards
1508‐016 ProxKey II Key Tags - HID Prox Cards ‐ Special Order.
These cards include sequential coding, specific card numbers and specific start / stop numbering sequences.
1508‐143 ProxCard II Clamshell Cards
1508‐144 Prox II ISO Graphics Cards
1508‐145 ProxKey II Key Tags
1508‐014 ProxPass Active Tags (use with 1815‐395 only)
Specifications
Readers
- 26-bit weigand output.
- Most readers operate on 5-12 VDC.
- Proximity readers are not designed for stand-alone operation and must be connected to an access controller.
DKS Readers
- 1815-300; up to 3-inch read range.
- 1815‐301; up to 4-inch read range.
- 1815‐302; up to 2-inch read range.
- 1815‐305; up to 30-inch read range.
- 1815‐330; 1815‐300 reader on a surface mount enclosure.
- 1815‐331; same as 1815‐330 but also includes a 2351‐010 Tracker expansion board
- 1504-124; 1815‐300 mounted on surface enclosure with built in intercom substation.
AWID Readers
- 1815‐280 (SR 2400); up to 4‐inch read range.
- 1815‐281 (SP 6820); up to 8‐inch read range.
- 1815‐282 (MM 6800); up to 8‐inch read range.
- 1815‐290; 1815‐280 reader on a surface mount enclosure.
- 1815‐291; same as 1815‐290 but also includes a 2351‐010 Tracker expansion board.
- 1504‐122; 1815‐281 mounted on surface enclosure with built in intercom substation.
- 1815‐283 (MR 1824); up to 24‐inch read range. Includes regulated power supply.
- 1815‐284 (MR 1824 MC); metal compensated; up to 16‐inch read range. Includes regulated power supply.
- 1815‐160 (LR 2000).
- 1815‐168 Installation Kit.
- 1815‐162 Power Supply.
- 1508‐072 Mounting Bracket.
Long Range Vehicle Tag Reader
Read range varies depending on the type of tag used. Maximum read range is 15 feet.
Installation kit is mandatory for proper setup, otherwise warranty will be void (AWID Policy.)
HID Readers
- 1815‐380 (ProxPoint Plus); up to 3-inch read range.
- 1815‐381 (MiniProx); up to 5-inch read range.
- 1815‐382 (ThinLine II); up to 5-inch read range.
- 1815-390; 1815‐382 reader on a surface mount enclosure.
- 1815-391; same as 1815‐390 but also includes a 2351‐010 Tracker expansion board.
- 1504‐123; 1815‐382 mounted on surface enclosure with built in intercom substation.
- 1815‐395 (MaxiProx);
Up to 6‐foot read range with 1508‐014 tags.
Includes regulated power supply.
TagMaster Long Range Readers
Readers operate in the 2.45 GHz spectrum and are ideal for automatic vehicle ID applications. Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application.
- Readers
1815‐422 LR‐6XL; Extended long range reader (46 ft.)
1815‐421 LR‐6; Long range reader (32 ft.)
1815‐420 LR‐3; Long range reader (16 ft.) - Mounting Brackets
1815‐455 Wall & pole mount kit
1815‐456 Ceiling / wall mount kit - Antenna Technology Tags
1815‐430 Mark Tag TpE; Permanent link between tag and vehicle
1815‐431 Mark Tag MeM; Mounted on dash or windshield - Read Only Tags
1815‐435 Mark Tag.; Read only, cannot be copied or changed
1815‐436 Mark Tag DUO; Read only, hermetically sealed for industrial applications - Read / Write Tags
1815‐440 Script Tag; General purpose programmable tag
1815‐445 2 in 1 Combo Tag; TagMaster + HID or iClass - Tag Holders
1815‐540 WinFixMem; Use with Mark Tag MeM
1815‐541 WinFix
