Access Control Solutions

Since 1948

Interior & Gate Access Devices

  • Interior door access control devices
  • Interior and exterior gate access control devices

DKS interior access devices can be used in a variety of applications to meet basic access control requirements. Lighted exit buttons provide free exit while key switch and keypad devices control entry through doors with electric or magnetic locks. Gate control devices provide manual operation and control of automated vehicular gates. These control devices are designed to mount into single-gang electrical boxes.

Models

Exit Button

1211-080 Exit Button

Exit Button

1211-081 Exit Button

Keyswitch

1206 Key Switch

Keypad

1509 Keypad

Exit Button

1200-006 Three Button
Gate Exterior

Three Button

1200-007 Three Button
Gate Interior

Gate Control

1200-017 Manual Control
Gate Interior

Exit Button

1404-080 Gate Operator
Reset Control

 

Interior Control Stations

EXIT BUTTONS
Model 1211-080 / 1211-081

  • Provides a release device for doors secured with a magnetic lock or electric strike.
  • Lighted Exit push buttons.
  • 12-volt DC power (for light).
  • Normally Open / Normally Closed switch contacts (field selectable).
  • 1211-081 designed for mullion mounting.

MORTISE CYLINDER KEYSWITCH
Model 1206-080

  • Momentary contact.
  • Mortise cylinder can be re-keyed to match existing locks.
  • Normally Open / Normally Closed switch contacts (field selectable).

KEYPAD
Model 1509-080

  • Stand-alone single code (programmable) keypad.
  • One 4-digit entry code.
  • One 4-digit hold code.
  • Dry contact form C relay.
  • Requires 12-24 volt AC or DC power.
  • 1509-081 is weigand compatible and connects to a weigand controller.

Gate Operator Control Stations

THREE BUTTON EXTERIOR
Model 1200-006

  • Ideal for exterior applications, interior too.
  • Can be surface or post mounted.
  • OPEN - CLOSE - STOP control.
  • Operates with DKS gate operators only.

THREE BUTTON INTERIOR
Model 1200-007

  • Provides manual control of automated vehicular gates, interior use only.
  • OPEN - CLOSE - STOP control.
  • Operates with DKS gate operators only.
  • All switch contacts are dry contact normally open.

GATE CONTROL TOGGLE
Model 1200-017

  • 3-position control switch for automated vehicular gates, interior use only.
  • Center position is neutral for normal operation.
  • Down position is momentary contact to open a gate.
  • Up position is toggled to hold a gate open.
  • Can be used with most gate operators.

OPERATOR RESET CONTROL
Model 1404-080

  • Must be installed in the line-of-site of the gate operator.
  • Provides a manual reset control when an operator is in a hard shutdown condition.
  • Includes an audible and visual alarm.
  • Exterior use.
  • Operates with DKS gate operators only.